- Pret: 250.
- Modalitate de contact: 0733027554.
- Modalitate de plata: Ramburs.
- Starea: Second Hand.
- Garantie: Nu.
- Cantitate: 1.
- Oras: Bucuresti.
- Modalitate de livrare: Predare personala.
Kingston’s KHX8500D2T1K2/4G is a kit of two 256M x 64-
bit 2GB (2048MB) DDR2-1066 CL5 SDRAM (Synchronous
DRAM) memory modules, based on sixteen 128M x 8-bit
DDR2 FBGA components per module. Total kit capacity is
4GB (4096MB). Each module pair has been tested to run
at DDR2-1066MHz at a latency timing of 5-5-5-15 at 2.2V -
2.3V. The SPD is programmed to JEDEC standard latency
800Mhz timing of 5-5-5-18 at 1.8V. Each 240-pin DIMM uses
gold contact fingers and requires +1.8V.
FEATURES
•Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
•Double-data-rate architecture; two data transfers per
clock cycle
•Bidirectional data strobe(DQS)
•Differential clock inputs(CK and CK)
•DLL aligns DQ and DQS transition with CK transition
•Programmable Read latency 5 (clock)
•Burst Length: 4, 8 (Interleave/nibble sequential)
•Programmable Burst type (sequential & interleave)
•Timing Reference: 5-5-5-18 at +1.8V / 5-5-5-15 at +2.2V - 2.3V
•Edge aligned data output, center aligned data input
•Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
•Serial presence detect with EEPROM
•High Performance Heat Spreader
•PCB : Height 1.180” (30.00mm), double sided component